This is a sample Dyna® maintenance schedule. Please check your owners manual for your specific year.
| DYNA® MAINTENANCE SCHEDULE | ||||||||
| GENERAL | ||||||||
| Regular Service Intervals: Dyna® Models | ||||||||
| ITEM SERVICED | PROCEDURE | 1000 Ml. 1800 KM |
5000 Ml. 8000 KM |
10,000 Ml. 16,000 KM | 15,000 Ml. 24,000 KM | 20,000 Ml. 32,000 KM | 25,000 Ml. 40,000 KM | NOTES |
| Engine oil and lilter | Replace | X | X | X | X | X | X | |
| Oil lines and brake system | Inspect for leaks | X | X | X | X | X | X | 1 |
| Air cleaner | Inspect, service as required | X | X | X | X | X | X | |
| Tires | Check pressure, inspect tread | X | X | X | X | X | X | |
| Wheel spokes | Check tightness | X | X | X | 1, 4 | |||
| Primary chaincase lubricant | Replace | X | X | X | ||||
| Transmission lubricant | Replace | X | X | |||||
| Clutch | Check adjustment | X | X | X | X | X | X | 1 |
| Rear belt and sprockets | Inspect, adjust belt | X | X | X | X | X | X | 1 |
| Throttle, brake and clutch controls | Check, adjust and lubricate | X | X | X | X | X | X | 1 |
| Jiffy stand | Inspect and lubricate | X | X | X | 1 | |||
| Fuel, lines and fittings | Inspect for leaks | X | X | X | X | X | X | 1 |
| Fuel pump filter | Replace | X | 1 | |||||
| Brake fluid | Check levels and condition | X | X | X | X | X | X | 5 |
| Brake pads and discs | Inspect for wear | X | X | X | X | X | X | |
| Spark plugs | Inspect | X | X | X | X | X | X | |
| Replace | X | |||||||
| Electrical equipment and switches | Check operation | X | X | X | X | X | X | |
| Front fork oil | Replace | 1, 6 | ||||||
| Steering head bearings | Adjust | X | X | X | 1, 2 | |||
| Rear fork bearings | Inspect every 30,000 miles (48,000 kilometers) | 1 | ||||||
| Critical fasteners | Check tightness | X | X | X | 1 | |||
| Engine mounts and stabilizer links | Inspect | X | X | 1 | ||||
| Battery | Check battery and clean connections | 3 | ||||||
| Exhaust system | Inspect for leaks, cracks, and loose or missing fasteners or heat shields | X | X | X | X | X | X | 3 |
| Road test | Verify component and system functions | X | X | X | X | X | X | |
| NOTES: | 1 . Should be performed by an authorized Harley-Davidson dealer, unless you have the proper tools, service data and are mechanically qualified. 2. Disassemble, lubricate and inspect every 30,000 miles (48,000 kilometers). 3. Perform annually. 4. Not all vehicles are equipped with spoke wheels. Consult appropriate topic in service manual. 5. Replace D.O.T. 4 HYDRAULIC FLUID and flush system every tow (2) years. 6. Disassemble, lubricate and inspedt every 50,000 miles (80,000 kilometers). |
|||||||










